Varec 4532 Manuel d'instructions télécharger pdf (Page 26)

Mounting Average Temperature/Water Bottom Sensor and Converter

16 Installation and Operations Manual

5.2.2 Thermo well method

The flexible tube is inserted into a thermo well with a diameter of 2" or more.

Figure 5-5: Thermo well application

Caution! The flexible tube must be lowered carefully without bending too much or scratching

at the inner edge of the nozzle hole.

1. Insert a gasket and lower the flexible tube into the inlet of the stilling well.

2. Rotate the 4532 ATC so that you can set up the cable in the most convenient way.

3. Fix the mounting flange of the 4532 ATC to the nozzle on the tank top using bolts.

Electrical compartment

Cable entry as specified

Flange

Flexible tube

approx.500 mm

From tank bottom to

element position #1

Clearance below

bottom hook

Ø26 mm(1.02")

400 mm (15.57")

(20")

Tank bottom

If the tank internal

pressure exceeds

1bar, fix the thermo

well in accordance

with below figure.

welding

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 69 70

Pas de commentaire

Varec 4532 Manuel d'instructions Page 26